MoBikon

The conical hole created for the plastic cone is very simple to fill with a prefabricated MoBikon® supplied by us. The MoBikon® is thrust into the hole, which results in the cone remaining extended by approximately 1 or 2 cm at the front of the hole. Thereafter, the extended part of the cone is easy to break off with a hammer/sledge hammer until it is level with the wall. The pressure of the surrounding concrete will cause the cement matrix on the outside of the c one to collapse and the c ork-particles to be compressed. In this way the permanent spring pressure of the cork will result in a permanent clamping wheel. The MoBikon® can be supplied in two sizes, so that in some cases the cone will protrude from the rear of the wall. The protruding part can, if necessary, be simply broken off a hammer/sledge hammer. The MoBikon® is already being used with great success in a variety of building projects. The MoBikon® has to be placed as soon as possible after unpacking. Seviral “environmentally’ unpackaging oils have a negative influence on the hardening process.

MoBikon

Art. no. Description Wt. / pack. St. / verp.
2.05.120 MoBiKon Wall size 120mm 8,00 Kg 24
2.05.130 MoBiKon Wall size 130mm 8,00 Kg 24
2.05.140 MoBiKon Wall size 140mm 9,00 Kg 24
2.05.150 MoBiKon Wall size 150mm 10,00 Kg 24
2.05.160 MoBiKon Wall size 160mm 10,00 Kg 24
2.05.170 MoBiKon Wall size 170mm 11,00 Kg 24
2.05.180 MoBiKon Wall size 180mm 11,00 Kg 24
2.05.190 MoBiKon Wall size 190mm 12,00 Kg 24
2.05.200 MoBiKon Wall size 200mm 12,00 Kg 24
2.05.220 MoBiKon Wall size 220mm 13,00 Kg 24
2.05.230 MoBiKon Wall size 230mm 13,00 Kg 24
2.05.240 MoBiKon Wall size 240mm 14,00 Kg 24
2.05.250 MoBiKon Wall size 250mm 16,00 Kg 24
2.05.280 MoBiKon Wall size 280mm 16,00 Kg 24